The rule, in plain English
Under A.R.S. 36-1681(B)(3), gates in a pool enclosure must:
- Close and latch on their own
Self-closing and self-latching, so a gate left open swings shut and locks.
- Have the latch out of a child's reach
At least 54 inches above the ground. Or the latch can be on the pool side, at least 5 inches below the top of the gate, with no opening larger than 1/2 inch within 24 inches of the release.
- Or use a key, electric opener or combination lock
Then the latch can be at any height.
- Open outward, away from the pool
A child pushing on the gate can't push it open into the pool area.
Quick checks you can do today
- Open the gate halfway and let go. Does it close and latch every time?
- Measure the latch height from the ground.
- Check which way it swings. It should open away from the pool.
- Look for a gap under or beside the gate that a 4-inch ball could pass through (the same 4-inch rule as the rest of the barrier).
Hinges and closers wear out in the Arizona sun. If your gate no longer swings shut on its own, a pool fence installer can usually replace the hardware without replacing the fence. Many cities have their own pool code too, so check yours.